W8001709 - ABS Wheel Speed Sensor

On SALE!

Click Image for Gallery

PLEASE READ!!!

Order Shipment Notice:

Most orders are shipped within 24 hours from the order date. Orders placed on the weekend or after cutoff on Friday, and orders placed on select holidays are processed on the next business day. Please see our shipping terms for more information.

Part# W8001709

This is a Brand New Workhorse ABS Wheel Speed Sensor. This Part Services One Wheel End and the Kit Includes the Metal Bushing & Grease. Overall length is approximately 40.5".

Applications:

W20 & W22
W24
W42
W62

Received the new part today - thank you. I haven't yet removed the old part. Before I do, can you share a basic description of the use of the metal jacket and grease? It appears that the jacket fits on the cylinder body before inserting. Is the grease used to coat around the entire cylinder before inserting, or just the tip? Or is the tip kept grease free? Do you recommend dielectric grease on the electrical connection? Thank you in advance. ( Ricky Hunkins, 03/22/2024 )

The grease will just need to be used around the sides of the sensor, inside the metal sleeve and not on the tip. The metal sleeve is just there to protect the sensor shaft from rubbing on the inside of the sensor hole. The use of dielectric grease is a good idea on any electrical connection that is exposed to the elements. ( Support )

IS THE CORRECT SENSOR FOR MY 2000 Monaco Knight motor home? ( Jerry Michael Lane, 08/22/2021 )

Hello Jerry , we don't have a way to verify that , you can try Rev-Group at 877-466-6226 . ( they own Monaco) ( Support )

Looking for the right front abs sensor ( Daniel, 08/03/2021 )

W8001709 - ABS Wheel Speed Sensor is correct for your chassis, they are the same sensor for all 4 locations . ( Support )

What is the correct speed sensor for front left wheel ( Beverly Sheffer , 11/19/2020 )

W8006778 is the correct left hand front sensor for your VIN: https://www.ultrarvproducts.com/W8006778-Left-Front-ABS-Sensor-P32-Chassis ( Support )

Is it possible to clean off the speed sensor with alcohol as a temporary fix to determine which sensor needs to be replaced? I recently had both tie rod ends changed at a truck repair shop, and as a coincidence when i started up my unit at the shop, the ABS light was on. the service personal stated the did not touch the sensors. ( Dale Lufkin, 11/03/2020 )

Yes, you can pull the sensors out and clean and re-insert to see if that corrects the issue. You can also test the resistance of the sensor, there should be between 900 to 2000 ohms measured between the two pins. To measure the resistance at the sensor connector, disconnect the sensor from the sensor extension cable. Connect the ohmmeter to the two sockets on the sensor cable. ( Support )

Would this ABS Sensor fit on both front and rear (2007 W22 Vin # above). Thanks ( Wilfred Bush, 03/31/2020 )

Yes, that is the correct part # for all 4 wheel ends. ( Support )

LOOKING FOR A WHEEL SPEED SENSOR FOR A 2008 INTERNATIONAL 4200 -1htmpafm08h542227 ( Jeff Ventre , 10/29/2019 )

Hello, we do not stock parts for a International. You would need to call a International dealer. ( Support )

Looking for the right rear abs sensor for this VIN ( Bob Macpherson, 08/16/2019 )

W8001709 is correct for all four corners on the W22 chassis, which you have. ( Support )

My shop is replacing my right front ABS speed sensor and they are telling me the part alone is $219.00. I find this price to be quite high and understand they have a mark up but can you tell me how much I can buy this part for from your store?? Thanks, Joe ( Joe M., 06/10/2018 )

The part # for the Right Front wheel speed sensor on your VIN is W8006803, cost is $143.70. ( Support )

dear sir this part can use for allegro bus (tiffin motorhomes) rear wheel speed sensor replacement vin no 4VZBT10917C058415 ( sivakumar, 12/20/2016 )

Hi,

Your VIN indicates you have a Spartan chassis. We do not have a way to look up parts by VIN for Spartan so I recommend contacting them directly to verify part #'s. Their phone # is 800-722-3025.

( Support )

Dear Sir's, I have a 2002 Hoilday Rambler motorhome on a workhorse chassie. The ABS lite comes on. I was greaseing the other day and noticed that the ABS sencor was broke off . Is this part hard to change. Found the part on your website. Can you tell me how to change it. Your help will be very thankful and helpful. Thanks. P>S> It is on the left rear tire.

( Dale Pisciotta, 03/30/2016 )

Dale,

This is not a difficult part to replace. The sensor slides into a hole on the back of the wheel hub so you would just need to extract that plug, unplug the other end and install the new one.

( Support )

Ask a question

Your Name

VIN...(This is helpful):

Your Question

Note: HTML is not translated!

WARNING PROP65 - see details above The state of California requires that this warning be posted for people purchasing products that reside in California.

WARNING: Products may contain one or more chemicals known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov

VIN Verification Service Item

This product allows for a VIN verification service.

VIN part verificaion is a service that we provide free of charge when a part is purchased.
When you provide your VIN below we will personally verify your part selection by your VIN before shipment of your order.
This helps ensure that this is the correct part for your vehicle.
This is not an automatic VIN check, it is done by a parts specialist once order is placed.
We can only VIN verify vehicles back to model year 1996, if older we can help but can't guarantee fitment.
If you would like to have your part selection verified before purchase please call or email us.