W8800481 - Air Filter Element

On SALE!

Click Image for Gallery

PLEASE READ!!!

Order Shipment Notice:

Most orders are shipped within 24 hours from the order date. Orders placed on the weekend or after cutoff on Friday, and orders placed on select holidays are processed on the next business day. Please see our shipping terms for more information.

Part# W8800481

Description:

Air Intake Filter Element

Application:

All Year Models Workhorse with GM gas engine

Is there a video on how to replace the cabin air filter in a 2004 Itasca 8100 vortec motor?

Thanks! ( Jeff, 08/21/2023 )

We do not have any videos of this, sorry. ( Support )

I have a National dolphin 6356 with a Workhorse Vortex 8.1 and I am about to change the air filters. Does the air filter in the picture is the 16 x 8"? ( Humberto, 01/13/2021 )

Yes, it is. ( Support )

I own a 2005 Allegro open road motor home with an 8.1 Chevy engine VIN is 5B4MP67G153402897 and an Allison trans mission. How do I get at the air filter to change it? ( Roger Wingender, 11/14/2020 )

There are 3 metal retaining clips that latch over the top of the lid. On the bottom of the lid are "fingers" that slide into slots on the air box. The way I do it, is I turn the steering wheel full passenger side to open up the wheel well. Once I get in there, I reach over the top of the air box and on the box side (closest to the front of the RV) you will feel the clips, lift these up back towards you and it will release the tension on the lid. Once you have released all three clips, pull the top of the lid towards you and then lift the bottom of the lid out of the retaining slots. ( Support )

Do you have the foam front for this air filter? Mine degraded to basically nothing.
( Harold, 04/09/2020 )

Harold, those are no longer available and normally discarded anyway. ( Support )

On the 2003 8.1 W22 Rexhall Aerbus, do I have to take all the duct work to get to the air cleaner ( George, 04/19/2019 )

No, you can remove the air box lid by releasing the three clips on top of the lid and then lifting the lid up out of the retainers on the bottom. You should be able to push the lid out of the way enough to slide the filter in and out. To give yourself more room, you can undo the hose clamps and pull the tube off the lid so you can completely remove the lid. ( Support )

Is there no way to put a Cold Air Intake on a 2001 8.1L P32 ? Or even a high-flow element? I don't care about engine noise; I am sound insulating the doghouse and surrounding. I would love to lose the tuba. Scott Barielle

( Scott Barielle, 04/25/2015 )

Scott,

The Banks Ram Air Intake Part # 49194 is not designed for the P-Chassis, however, we have successfully installed one before with modification. The difference is in the tube going up to the throttle body. If you take a heat gun and warm up the tube, you can make the appropriate clearances for the tube to fit. Please note that this would void the warranty on the system as it was not intended for use on that vehicle and once modification has been done it is not returnable.

( Support )

Ask a question

Your Name

VIN...(This is helpful):

Your Question

Note: HTML is not translated!

WARNING PROP65 - see details above The state of California requires that this warning be posted for people purchasing products that reside in California.

WARNING: Products may contain one or more chemicals known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov

VIN Verification Service Item

This product allows for a VIN verification service.

VIN part verificaion is a service that we provide free of charge when a part is purchased.
When you provide your VIN below we will personally verify your part selection by your VIN before shipment of your order.
This helps ensure that this is the correct part for your vehicle.
This is not an automatic VIN check, it is done by a parts specialist once order is placed.
We can only VIN verify vehicles back to model year 1996, if older we can help but can't guarantee fitment.
If you would like to have your part selection verified before purchase please call or email us.