1999 ford f53 Have #4 on rubber.with 10x61/2 steel plate and 51/2and 9” centre to centre bolt holes what is your part #
( Al jones, 07/25/2023 )
AO25-004 would be the correct replacement. ( Support )
How much does 1 set weigh?
( Scott Krueger, 07/15/2023 )
These springs weight about 33 lbs. each. ( Support )
also do this come in a pair?
( Scott P, 05/21/2022 )
The Mor/Ryde rubber shear springs are sold individually , we recommend contacting Mor/Ryde directly for part #'s and quantity needed, then we can place the order .
Contact MORryde Customer Service at 574-293-1581
( Support )
will this fit 1998 fleetwood pace arrow ford f53 chassie
( Scott Pedro, 05/21/2022 )
Hello Scott You will need to contact Mor/Ryde directly to verify .
Determining Replacement Spring Part Number:
1. Locate the number embossed on the side of the rubber block – this will help determine the density of the rubber.
2. Identify the year, make, and model of the unit.
3. Contact MORryde Customer Service at 574-293-1581 with this information for help determining your
replacement spring(s).
( Support )
I am ordering 2 (FOR BOUTH SIDES) part # AO25-004 . I NEED THE 2 SHOOK ABSORBERS FOR THE SAME TAG AXEL . i COULD NOT FIND IT IN YOUR SITE.
THE UNIT IS A RV DOLFIN 5370 YEAR 2000.
THE SHOK ABSORBER HAS PIN BOLT AND A NUT, ON THE TOP AND BOTON SIDES .
THANK YOU phone# 1 250 775 0072
( Pablo Bazerque, 05/12/2022 )
Pablo,
For application specific ordering, please contact MorRyde directly. They will be able to assist in locating the correct part# for you.
Contact MORryde Customer Service at 574-293-1581
( Support )
What is the length on these end to end?
( Jerry, 08/18/2019 )
We believe it is approximately 2 feet overall length. ( Support )
Please check for right part number and price on a pair of
Tag Axle Rubber Shear Spring's
For a 1989 Fleetwood Pace Arrow Vision
Thank You !!
( Ken Lane, 03/28/2019 )
Please contact Mor/Ryde at 574-293-1581 so they can assist in looking up the correct part # for your application. ( Support )
Do you carry for the 98 southwind 36s?
( John, 10/11/2018 )
Yes these should be the correct fit for your 98 Southwind, both the Chevrolet P32 and Ford F53 used this same spring assembly. ( Support )
95 Dolphin passenger side of vehicle dropped about 3.5" with loud bang. Got underneath and found this rubber spring broken from both surfaces and hanging down on that side wedged between its attachment plates. Was this the cause of the vehicle body dropping on that side or am I still looking for something else ?
( Leigh, 09/29/2018 )
Leigh, that is what holds the weight of your coach in that corner, so I would say that yes this part would be the cause of the coach dropping if it is broken. If you call Morryde at 574-293-1581 they can give you the correct part# to order from us. ( Support )
1997 F53 FLEETWOOD BLOUNDER 36S. DO I ONLY NEED 2 OF THESE? 1 FOR EACH SIDE. PLEASE LET ME KNOW. THANKS
( Maurice, 05/22/2018 )
That is correct. The MorRyde shear spring suspension system on your tag axle uses one block assembly per side. ( Support )
Working on a '96 National Dolphin, rubber springs seem to have lots of cracks in them. Can replacements be found?
( Michael Layton, 05/15/2018 )
The AO25-004 is the correct shear spring for your vehicle. ( Support )
All diagrams I've found, shows these installed like from side-to-side, (or say from the frame out towards the wheels). My rubber springs are installed, like front to back, (bumper-to-bumper) in-between the wheels. I had been told that I have the G02-18 suspension system on this. If this is a replacement spring for this coach/suspension system, does that mean that I would need '4' of these springs, (2 on each side)? OR, do I need an entirely different spring?
Thanks
( J, 08/13/2017 )
If you aren't sure which springs you require based on the pictures and dimensions we have listed on our website we always recommend contacting Mor/Ryde directly. It sounds like you may need the TO108-002 but I can't be certain: https://www.ultrarvproducts.com/MorRyde-Suspension/TO108-002-Mor-Ryde-Tag-Axle-Rubber-Spring-(Individual) ( Support )
Is this price for a set or just one side
( George means, 05/15/2016 )
George,
This is for just one spring.
( Support )
Will these fit my 1999 f-53 chassis tag axle and should i replace both sides pass side failed
( Bill mcclory, 04/21/2016 )
Bill,
We don't have a way to check this by your VIN but these are definitely the most commonly used shear springs on the F53 chassis. We strongly recommend you replace both sides.
( Support )