Applications:

• 2004-2007 Cummins ISB 5.9L Common Rail

• 2008-2012 Cummins ISB 6.7L Common Rail

• 2006-2007 Cummins ISC 8.3L Common Rail

• 2004-2007 Cummins ISL 8.9L Common Rail

Description:

The 12000 Performance Module fits Cummins 5.9L ISB, 6.7L ISB, 8.3L ISC and 8.9L ISL engines with common rail fuel system. This diesel performance module is designed for fuel economy with up to 30% increase in horsepower/torque and fuel savings up to 10%-20%. Adjustable with a four position switch, Stock, +10%, +20%, & +30% hp. The module doesn't flash the ECM, instead it receives the data from the ECM, optimizes the signal to the engine improving the fuel efficiency and power. Best of all, this module comes with a Lifetime Warranty.
 
The RV Edition module will increase your power up to 30% over stock and is self-adjusting based on load and will deliver more power when needed.
And before you ask…no this does not flash your ECM! Instead we receive the data from the ECM and optimize the signal to the engine to improve both power and fuel efficiency. True Plug-and-Play connectivity means we aren’t going to ask you to cut and splice any wires. Just connect the module into your existing factory connectors.

Description:

The Bosch Fuel Rail Pressure Plug is used in conjunction with the TS Performance MP8 for the 2007.5-2012 Cummins ISB 6.7L (TSP2110304).It replaces the factory fuel pressure relief valve. The TS Performance instructions want you to remove the factory fuel pressure relief valve and shim it with washers which are both a difficult and delicate operation that we do not advise. It is also not as reliable as using a dedicated fuel rail"race" plug in place of the factory valve. The reason for modifying the fuel rail pressure relief valve is so that spikes in fuel pressure do not set check engine lights or de-rate the motor.

Description:
Exhaust Gas Temperature (EGT) is a very important gauge to have on any diesel engine, especially if modifications have been made to increase horsepower and torque. The Banks Power EGT Gauge Kit will accurately measure your exhaust gas temperatures up to 1500 Degrees Fahrenheit. This kit utilizes high quality components that are specific for use on motorhomes.

We recommend installing the Thermocouple Probe in the exhaust manifold pre-turbo. This location will provide the most accurate readings.

Features:

• Monitors exhaust gas temperature (EGT)
• Protects durability by eliminating safe-EGT-level guesswork
• Eliminates erroneous readings with ambient temperature compensation
• Accurate within 15 degree F at maximum operating temperatures
• 2000 degree F-rated, chromel-alumel thermocouple wire provides superior conductivity
• 1-Year Limited Warranty
• Illuminated 0-1500F full-sweep face
• Comes with probe & 55' lead wire