8805-1002 - REAR Workhorse W-Series Series / Kodiak / R26 UFO

On SALE!

Click Image for Gallery

PLEASE READ!!!

Order Shipment Notice:

Most orders are shipped within 24 hours from the order date. Orders placed on the weekend or after cutoff on Friday, and orders placed on select holidays are processed on the next business day. Please see our shipping terms for more information.

Please Note: If you have a 2004 please verify the top mount of the rear shock! If it is a eyelet then you need part # 8805-1003, if it has a vertical stud top mount then you need part # 8805-1002.

Koni 8805-1002

Description:

Koni Frequency Selective Damping (FSD) shock absorbers provide superior handling characteristics without compromising ride comfort. The FSD is firm where you need it, such as through corners, but rides soft over expansion joints and rough roads. A special valve filters out annoying vibrations before they enter the vehicle, resulting in a smooth ride over a variety of road surfaces.

Please Note: If you have a 2004 please verify the top mount of the rear shock, if it is a horizontal bolt then you need the 8805-1003 Koni for the rear. If it is a vertical stud then this is the proper rear Koni for your coach. If your build date of your chassis was 3/30/2004 or later (VIN -43392081 or higher) this would be the correct shock.

Applications:

Workhorse W20 - W22 & W24 (04.5-Current) Rear
Kodiak C4500/C5500 Rear (Pin/Pin)
Workhorse UFO Rear

Collapsed Length	Extended Length	Upper Mount	Lower Mount
12.68"	20.91"	Stem	Stem

I just received my order of 8805-1001 and 8805-1002 Koni shocks. When I opened the box for the rear 8805-1002 shocks there was an instruction sheet inside which appears to talk about adjusting the shock by turning 1-4 revolutions. I am confused I thought these (gold) shocks were completely self adjusting and there was no stiffness adjustment I needed to make. The instruction number at the top is 1027 05 00 00 301/2 on one side and 1027 05 13 42 on the other. Does this really apply to this shock? These shocks are for my motorhome with a workhorse chassis W22. ( Craig Larson, 03/12/2019 )

You are correct, the FSD (gold) shocks are self-adjusting. For some reason, Koni puts the adjustment instructions in all their boxes so just ignore that. ( Support )

Ask a question

Your Name

VIN...(This is helpful):

Your Question

Note: HTML is not translated!

WARNING PROP65 - see details above The state of California requires that this warning be posted for people purchasing products that reside in California.

WARNING: Products may contain one or more chemicals known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov