8805-1004 - FRONT Monaco / Holiday Rambler / Roadmaster 8/10 Bag (Koni FSD)

On SALE! 8805-1004 - FRONT Monaco / Holiday Rambler / Roadmaster 8/10 Bag (Koni FSD)
Click Image for Gallery

PLEASE READ!!!

Order Shipment Notice: 

Most orders are shipped within 24 hours from the order date. Orders placed on the weekend or after cutoff on Friday, and orders placed on select holidays are processed on the next business day. Please see our shipping terms for more information.

8805-1004 - FRONT Monaco / Holiday Rambler / Roadmaster 8/10 Bag (Koni FSD)

Koni 8805-1004

Description:

Koni Frequency Selective Damping (FSD) shock absorbers provide superior handling characteristics without compromising ride comfort. The FSD is firm where you need it, such as through corners, but rides soft over expansion joints and rough roads. A special valve filters out annoying vibrations before they enter the vehicle, resulting in a smooth ride over a variety of road surfaces.

Applications:

  • Monaco/Roadmaster 8 AirBag Front
  • Monaco/Roadmaster 10 Airbag Front

*Verify top mounting arrangement, this shock mounts on a horizontal stud. If you have a vertical stud you need a 8805-1016 instead.
This chassis requires 1 shock per airbag, so make sure quantity in cart is "4" to do all front shocks.



Collapsed LengthExtended LengthUpper MountLower Mount
15.12"
24.09"Eye 11/16"Eye 9/16"
I have a 99 Monaco Diplomat. Build was 11/98 My shock studs and bolts are as folows. Upper studs measure .687 = 17.5 mm lower bolts are .500 = 12.6 mm I see the shocks are listed at Upper 11/16 and the lower eye at 9/16. The upper will work but the lower of the Koni is .062 larger than the Monro shocks that are my original equipment. I would a fromt and rear kit that you offer but I'm worried about the lower clearance. I'm I going to have to drill 9/16 for the lower mounts ? Thanks
 ( Wesley Ray Schrier, 10/14/2022 )
Hello Wesley , the clamping force of the lower bolt to the sides of the shock bushing/sleeve is sufficient to securely install the shock, but if you are concerned , you could drill out the mounts and use larger bolts. Also be aware that some of those application will require the removal of the inner washer from the upper mounting stud. If the shock extends past the shoulder of the upper mount stud with the washer off, then you leave the washer off if not then put it back.  ( Support )

Beaver Marquis Jade 44QSL Model Year: 2006 Mfg Date 09-2005 VIN: 1RF10561461038277 Unit Serial Number 061020854583401 605315 Mileage 38,891 miles Roadmaster (Monaco) S-series Chasis Mfg Date 07-2005 Number 119499 GVWR-48,160 lb FRT GAWR-15,160 lb REAR GAWR-23,000 lb TAG GAWR-10,000 lb Is the Koni 8805-1004 shock for the front 4 positions? The existing Bilsteins have a small upper loop with the rubber extending on both sides for a total width of 1.5 inches. I need to know the upper and lower bolt size and the total eye width including any sleeve or rubber for both the front, rear, and tag positions.

 ( Bill Laatz, 06/28/2015 )

Yes, the Koni 8805-1004 is for the front 4 shock positions and the 8805-1005 is for the 4 drive axle shock positions and 2 tag axle shock positions. The 8805-1004 and 8805-1005 both have 3/4" top mount and 9/16" bottom mount. The width of the eyelet is 1-1/2" as well.

( Bill )

What is the difference between the 88051004 for the front and the 88051005 for the drive and tag on my 2006 Beaver Marquis

 ( Bill Laatz, 06/13/2015 )

The valving is different to accomodate for the weight difference between the front and rear.

( Support )

Ask a question

Note: HTML is not translated!

Write a review

Please login or register to review

 The state of California requires that this warning be posted for people purchasing products that reside in California.

WARNING: Products may contain one or more chemicals known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov

Shipping Insurance Notice

NOTICE: For orders outside of United States

If you are placing an order to ship outside the United States, Shipping Insurance will be required and added automatically at checkout.

      

  • Views: 29922
  • Brand: Koni
  • Product Code: 8805-1004
  • Availability: 12
  • $229.50
  • $190.00
This product has a minimum quantity of 2
Add to Wish List Compare this Product

0 reviews / Write a review