Name: 8805-1009 - REAR Spartan Chassis / Tiffin PowerGlide (Koni FSD)
Brand: Koni
SKU: 8805-1009
Price: 195.00 USD
Availability: OutOfStock

8805-1009 - REAR Spartan Chassis / Tiffin PowerGlide (Koni FSD)

Out of Stock

8805-1009 - REAR Spartan Chassis / Tiffin PowerGlide (Koni FSD)

: 8805-1009

Out of Stock(0)

Based on 0 reviews.

$195.00

$229.50

Available Options

VIN Verification (Spartan Chassis Only)

Qty

Add to Cart

This product has a minimum quantity of 2

Description:

Koni Frequency Selective Damping (FSD) shock absorbers provide superior handling characteristics without compromising ride comfort. The FSD is firm where you need it, such as through corners, but rides soft over expansion joints and rough roads. A special valve filters out annoying vibrations before they enter the vehicle, resulting in a smooth ride over a variety of road surfaces.

Special Note: We have seen a limited number of Spartans and PowerGlides that use a 5/8" lower shock bolt instead of the standard 3/4".

You can see if you need the bushing set by checking if an 1-1/8" wrench fits snug on the head of the lower shock bolt.

If it DOES fit then you DO NOT need the bushing set,

If it is smaller then you would require the bushing set.

If you need the bushing set for your chassis you can purchase a 3/4" to 5/8" steel bushing here: 3/4-5/8-BUSH

Applications:

Spartan MountainMaster I-Beam (240AR) Rear
Spartan MountainMaster IFS up to 14K Rear
Spartan MountainMaster IFS 14k to 16K Rear
Spartan K2, K3, IFS 16K to 18K w/ Tuthill Suspension Rear
Tiffin Allegro Breeze 2010+ Rear
Tiffin Allegro Bus w/ PowerGlide Rear
Tiffin Phaeton w/ PowerGlide Rear

Collapsed Length	Extended Length	Upper Mount	Lower Mount
15.08"	23.70"	Eye 3/4"	Eye 3/4"

The state of California requires that this warning be posted for people purchasing products that reside in California.

WARNING: Products may contain one or more chemicals known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov

2014 Tiffin bus, 37AP… power glide chassis…can you tell me what Koni shocks to order, front and rear? ( Ellen Endicott, 01/27/2025 )

Your coach should have the ZF independent front suspension, we can verify this for you if you send a picture of the original shock. Front would be Koni 99B-3262 and rear would be 8805-1009.

I did the 1 1/8" wrench test and it was not snug. So does that mean I need the 16ea. spacers for rear shocks? The shocks for front are the 99B-3234 are this the new upgraded model? The back are 8805-1009 correct. Thanks ( rc thomas, 03/03/2024 )

Yes, if the wrench did not fit tight then you will need the spacer kit, you just need to order quantity 1 to do the lower bolt on each side. 99B-3234 is the new EVO model shock for your application.

Will an oversize Koni fit on my Spartin chassis . I have a 2019 entegra Aspire, the original buyer quickly installed larger Koni shocks on the front but not the rear. Is this a ride problem as far as porpoising is considered or maybe he did not do the rear because in just looking at the front Konis and then observing the amount of clearance between shock and the frame member it seems as a maybe fit at best for the larger Koni? I,m looking at maybe a half inch. ( John Pepper, 10/01/2022 )

Hello John, the the larger diameter Koni "90 Series" are for front applications, primarily for Independent front suspensions, which place more leverage on the shocks and need more damping due the increased leverage. The 8805-1009's are the "FSD" design and work well on the rear application as they are "self adjusting" too give control when needed and still provide good ride quality .

Looking for larger size shock than standard on my 2019 entegra Aspire 40 foot. More like the 60MM size, Will they fit? ( John Pepper, 09/26/2022 )

Koni 99B-3234 front and Koni 8805-1009 rear will fit your Entegra Aspire.

I have a 2013 Tiffin Phaeton 36GH. I think she requires 2ea 99B3209 shocks for the front and 2ea 8805 1009 shocks for the rear. Can you verify or correct this information? ( Bill Milman, 09/02/2022 )

Your coach will take the 8805-1020 front shocks and 8805-1022 rear shocks.

Ask a question

Your Name

Your Question

Note: HTML is not translated!

Captcha

Please complete the captcha validation below

Please Note:

Most orders are shipped within 24 hours from the order date. Orders placed on the weekend or after cutoff on Friday, and orders placed on select holidays are processed on the next business day. Please see our shipping terms for more information.

8805-1009 - REAR Spartan Chassis / Tiffin PowerGlide (Koni FSD)

Available Options

Write a review

Ask a question

Please Note:

Performance Packages

Suspension Packages

My Account

Customer Service

Information

Our Brands

Our Companies

8805-1009 - REAR Spartan Chassis / Tiffin PowerGlide (Koni FSD)

Available Options

Write a review

Ask a question

Please Note:

Related Products

Koni 8805-1021

9005-1098 - FRONT Tiffin Allegro Breeze w/ IFS 2013-2018 (Koni FSD)

90-2815 - FRONT Spartan MountainMaster IFS1200 thru IFS1360 '97-'06 (Koni Adjustable)

99B-3234 - FRONT Spartan K2, K3 MountainMaster IFS1460 / IFS1660 / 16K+ / Tiffin Allegro Bus w/ PowerGlide Chassis Reyco IFS (Koni EVO)