Stage 3 - 2006-2019 Ford F53 V10 Class-A 20-22K GVWR Handling Kit

Stage 3 Description:
Motorhome traveling is supposed to be a fun, relaxing, and pleasant memorable experience. Ultra RV Product’s Stage 3 Handling Kit includes the benefits of Stage 1 & 2 and just puts the icing on the cake. Huge, heavy-duty front and rear anti-sway bars all but eliminate the side to side rock over uneven surfaces. You’ll immediately notice the improved stability as you round curves at speeds you wouldn’t have even considered attempting before! No longer will the drive be nearly as physically and mentally demanding as you attempt to hold it steady in a straight line for thousands of miles across this great nation. These carefully selected products are designed in helping you to keep your motorhome driving straight through challenging side winds, shoving winds of semi-trucks passing, rut tracking carved in the road, crowned highways, potholes, pavement drops, and other general bad road conditions. This kit can be installed in approximately 9 hours with standard garage tools. No welding, wiring, or drilling required.

Stage 3 Package Contains:

Rear Trac Bar  

Description:

The Rear Trac Bar mounts from the frame rail to the rear axle to prevent wandering or "tail wagging the dog" issues in windy conditions or by passing trucks. This is a very popular upgrade as it provides a significant increase in stability of the coach, inspiring driver confidence and less work at the wheel. Assembled from heavy-gauge steel and polyurethane bushings, this is a "no-drill" installation. Powder coated for long lasting protection and made Proudly in the USA.

Safe-T-Plus Steering Control Unit and Mounting Bracket

Description:

Safe-T-Plus high-performance steering controls are designed to reduce over-steering your vehicle making it easier to drive to your destination.  Safe-T-Plus automatically stabilizes the vehicle, enabling you to maintain straight ahead steering through front tire blow-outs, potholes, uneven pavement, ruts, bumps and side winds.

Benefits:

·         Reduces driver fatigue from oversteering

·         Protects against front-tire blowouts

·         Keeps vehicle centered against side winds & passing vehicles

·         No more "white-knuckle" driving

·         Decreased wear-and-tear on front end

Features:

·         Positive centering capabilities

·         Hydraulic shock absorption

·         Long lasting metallic plating

·         Maintenance free

·         Simple bolt-on installation

·         Lifetime vehicle warranty for RV's

Front and Rear Koni EVO Shock Absorbers

Description:

Experience a smooth controlled ride on your Class A motor home with Koni EVO 99 shock absorbers. Koni's patented open intake valves ensure that you get a smooth ride along with enough force to keep your RV from bouncing down the road. EVO 99 is especially good on independent front suspensions that have a limited amount of shock travel. Large piston holes and custom tuned valve stack ensure that you have extra body control when you need it without undue harshness.  You don't want poor road conditions to spoil your cross-country trip. The 50mm bore piston reduces internal pressure for smooth operation over rough roads, and the digressive valve stack and modular piston design control bouncing over bridges and large bumps.

The EVO series is Koni's latest shock design. The main difference between the FSD and the EVO series piston is that it is almost 40% larger than the FSD series (50 mm vs 36 mm). The larger size means that it can take a lot more force, or the same force with less pressure which helps with cooling and better responsiveness. The larger body diameter allows for more oil capacity which also helps with cooling and increases the longevity of the shock. EVO series has a higher tensile strength than previous Koni designs. EVO incorporates open intake valves + FSD technology which exceeds the performance of FSD technology alone. 

Front Anti-Sway Bar

Description:

Roadmaster anti-sway bars deliver a remarkable improvement in stability and vehicle control for today's most popular motorhome chassis. Kit #1139-148 is an inch and three quarters diameter and is designed to replace the smaller diameter factory anti-sway bar for improved stability and handling. 

Designed for easy installation, Roadmaster anti-sway bars are made from cadmium plated 4130 chrome moly steel and ship complete with all necessary mounting hardware, polyurethane bushings and instructions.

Rear Anti-Sway Bar

Description:

Roadmaster anti-sway bars deliver a remarkable improvement in stability and vehicle control for today's most popular motorhome chassis. Kit #1139-145 is an inch and a half diameter and is designed to be used in conjunction with the factory anti-sway bar for improved stability and handling. 

Designed for easy installation, Roadmaster anti-sway bars are made from cadmium plated 4130 chrome moly steel and ship complete with all necessary mounting hardware, polyurethane bushings and instructions.

SuperSteer Front Radius Rod Kit

Description:

When you add Radius Rods to your Ford F-53 Motorhome, it will help to control movement in the front leaf spring bushing. The front to back flexing will be reduced and you will also experience improved cornering. Radius Rods are designed to stop the forward and rearward movement of the front suspension. There is a lot of flex in the leaf springs and the spring eye bushings. The Radius Rods will make the steering more responsive and reduce sawing at the steering wheel in sweeping turns. An additional benefit is an increase in stability. The SuperSteer® Radius Rods are a solution to common Ford F-53 problems including, Sway and Body Roll, Steering Play, Wind Buffeting, Road Wander and Rut Tracking.