P3032 - Supersteer Steering Bellcrank P-chassis

On SALE!

Click Image for Gallery

Made in America

Verified to have been manufactured in the USA

PLEASE READ!!!

Order Shipment Notice:

Most orders are shipped within 24 hours from the order date. Orders placed on the weekend or after cutoff on Friday, and orders placed on select holidays are processed on the next business day. Please see our shipping terms for more information.

Part # P3032

Description:

You may have experienced play in the steering wheel when driving your Chevy or Workhorse chassis motorhome. This play in the steering wheel can often be attributed to the bell crank (or "idler"), which supports the steering linkage. Original equipment designs utilize common sleeve bushings, which often wear out prematurely and cannot be adjusted for side play.

By contrast, SuperSteer P3032 bell cranks utilize tapered roller bearings, which are far better at carrying load and can be adjusted to achieve precise movement. The SuperSteer P3032 bell crank helps provide steering support in your motorhome and is a great form of steering upgrade.

Features:

Improves steering returnability
Rugged high-strength casting, steel spindle and tapered roller bearings
Reduces steering road wander and rut tracking
Helps to eliminate steering play - extends tire life
Bolt-in replacement for the original component
Lifetime warranty to the original owner

Applications:

Chevy P30 Motorhome - GM & Workhorse Chassis
Chevy P32 Motorhome - GM & Workhorse Chassis
Chevy P37 Motorhome - GM & Workhorse Chassis

INSTALLATION INSTRUCTIONS

I have a 1998 windsong MH with a P-32 chasis with the bellcrank design. Are the part numbers different for the left and right? Or are the bellcranks the same for either side? Also do you carry the upper control arm bushings for this vehicle? ( will adams, 09/30/2021 )

Hello,

Here are the part #'s for the Bellcranks and the Upper Control Arm Bushings.

UT20843 - Ultratrac P32 Bellcrank Arm Drivers Side (LH) 16k+ GVW (1993+)

UT20912 Ultratrac P32 Bellcrank Arm Passenger Side (RH) 16k+ GVW (1993+)

15030310 - Bushing - Upper Control Arm

( Support )

I just received a spreader bar from you - no problem there - but couldn’t help notice that after I ordered it is now out of stock. No worries there either as obviously I only need one for my application, but looking towards other possible upgrades for the future, I have to ask. Are so many things showing out of stock a temporary situation due to low supplies, or are you not planning to carry some of these items in the near future once they are sold out? I understand if you can’t review that for competitive reasons, just thought I’d ask out of my own personal planning concerns. Thank you! ( Jim Bell, 06/23/2021 )

Out of stock items are purely due to supply chain issues. We do not plan to discontinue carrying any of the products we have listed on our website. ( Support )

1994 p30 chassis . 454 engine . Alignment wouldnt align it untill idles were changed . What would be going rate for 2 of the bwll crank idler ( Rodney Bluma, 08/24/2019 )

Here is a link to our quick guide which shows all front end steering components: https://www.ultrarvproducts.com/Service-Quick-Guides/Workhorse-GM-P32-Front-End-Rebuild-Kit ( Support )

What bellcrank do I need for the passenger and the drivers side?

( Tim, 08/21/2015 )

Tim,

The part number that you would need for both sides would be P3032 and here is a direct link to that part on our site. P3032 this is a lifetime replacement part.

( Support )

I have a 1998 fleetwood south wind with a chevy p32 chassis GVWR is 16,500 Is this bellcrank designed for this year and model? What is the part number that I need for drivers and passenger side The alignment shop said I need the bellcranks replaced before they can do the Alignment Thanks

( Tim, 08/21/2015 )

The P3032 is the correct bellcrank and it is the same both left and right hand side.

( Support )

Ask a question

Your Name

VIN...(This is helpful):

Your Question

Note: HTML is not translated!

WARNING PROP65 - see details above The state of California requires that this warning be posted for people purchasing products that reside in California.

WARNING: Products may contain one or more chemicals known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov

VIN Verification Service Item

This product allows for a VIN verification service.

VIN part verificaion is a service that we provide free of charge when a part is purchased.
When you provide your VIN below we will personally verify your part selection by your VIN before shipment of your order.
This helps ensure that this is the correct part for your vehicle.
This is not an automatic VIN check, it is done by a parts specialist once order is placed.
We can only VIN verify vehicles back to model year 1996, if older we can help but can't guarantee fitment.
If you would like to have your part selection verified before purchase please call or email us.

Shipping Insurance Notice

NOTICE: For orders outside of United States

If you are placing an order to ship outside the United States, Shipping Insurance will be required and added automatically at checkout.

Views: 51552
Brand: SuperSteer
Product Code: P3032
Availability: 10

$384.75
$275.00

Qty

Add to Wish List Compare this Product

4 reviews / Write a review

P3032 - Supersteer Steering Bellcrank P-chassis

Made in America

PLEASE READ!!!

UT20843 - Ultratrac P32 Bellcrank Arm Drivers Side (LH) 16k+ GVW (1993+)

UT20912 Ultratrac P32 Bellcrank Arm Passenger Side (RH) 16k+ GVW (1993+)

15030310 - Bushing - Upper Control Arm

Ask a question

Write a review

VIN Verification Service Item

Shipping Insurance Notice

UT20843 - Ultratrac P32 Bellcrank Arm Drivers Side (LH) 16k+ GVW (1993+)

UT20912 - Ultratrac P32 Bellcrank Arm Passenger Side (RH) 16k+ GVW (1993+)

UT20968 - Ultratrac P32 Bellcrank Arm Driver Side (LH) 14k GVW (1991 & Earlier)

UT20988 - Ultratrac P32 Bellcrank Arm Passenger Side (RH) 14k GVW (1991 & Earlier)

UT29132 - UltraTrac HD Drag Link - Pitman Arm To Steering Arm (11" Length - Adjustable)