19420714 - 8.1L Throttle Body Assembly With Throttle Actuator

Sale -10%

Click Image for Gallery

PLEASE READ!!!

Order Shipment Notice:

Most orders are shipped within 24 hours from the order date. Orders placed on the weekend or after cutoff on Friday, and orders placed on select holidays are processed on the next business day. Please see our shipping terms for more information.

Description:

Brand New Workhorse Throttle Body Assembly with Throttle Actuator for 2003+ model year 8.1L Engines in Workhorse Chassis.

Applications:

All Workhorse Chassis 2003+ model year with an 8.1L Engine

Hi, when towing our Buick Envision with 2006 W-24 chassis/Winnebago Adventurer, accelerating thru 3rd gear at 50 mph, I get a flutter, especially when going uphill. Or when using cruise and downshifts to 3rd gear at 50 mph, i get the same flutter, if I feather the gas pedal (taking off cruise) i can get engine to pull load without flutter. Last year, when accelerating thru 3rd gear I experience a hesitation or flat spot at 50 mph, once over that speed everything was good, and engine runs fine at other speeds and RPM's. I have ScanGuage 3, sometimes now when this happens i get check engine light and P0102 code on the scan guage.
Is this part what is creating the problem, or could it be the Throttle Control Module? Thanks ( Gary Sieverding, 09/18/2024 )

I would suspect an issue with the mass air flow sensor, not the throttle body. ( Support )

Is this the same TB as PN 1267526 with #1257080 casted on the body and 26z08x on the TPS. I also plan to replace the TAC listed here w/ last two digits 24. Just wanted to be sure that everything is compatible. Thank you ( Bill Kaufman, 06/05/2024 )

Yes, this is a direct replacement to those part #'s. ( Support )

Is this the correct part for 2006 workhorse w22. Holiday Rambler ( Mark, 04/22/2024 )

Yes, this is the correct part #. ( Support )

will your 19420714 work for 1GBJG31G011209154 ( James W Gillingham, 09/19/2023 )

No, this only fits 2003+ 8.1L's. The part # you will need to find is 17113671. ( Support )

Will this throttle body work on my 2006 w22? Vin #584MP67G763416224 ( Ron, 06/09/2023 )

Yes, that is correct for that VIN . ( Support )

what is the correct throttle body for this rv. I have a throttle postion that under load teneds to flutter. not like a miss.. idel often rev a bit up and down. suspecting bad/dirty TB since it seems to run fine at most rpm ranges. .. should I replace the TAC at the same time? ( douglas G sylliaasen, 11/07/2021 )

Yes, this is the correct throttle body for your VIN. I would have the engine data analyzed to find out if the commanded and actual throttle position are matching before replacing those components. You do not need to replace the TAC module at the same time, usually you will get a check engine light and DTC for an issue with the TAC. ( Support )

Is this the correct Throttle body for my 2004 w22? Vin # 5b4mp67g743380449
It looks like it includes TPSensor? ( Karl, 05/31/2021 )

That is the correct TB based on your VIN. They do include the sensor. ( Support )

Will this fit a 2003 workhorse w22 8.1L vortec This is in a Winnebago Chieftian ( Brenda Robinson, 12/16/2020 )

Yes, that is the correct throttle body for your VIN. ( Support )

Will this work on a 2002 Workhorse 8.1 Liter engine? ( Randy Pietro, 12/03/2020 )

Randy,

Unfortunately this will not work on yours this one is for 2003 and newer chassis. You would require part# 17113671

( Support )

Ask a question

Your Name

VIN...(This is helpful):

Your Question

Note: HTML is not translated!

WARNING PROP65 - see details above The state of California requires that this warning be posted for people purchasing products that reside in California.

WARNING: Products may contain one or more chemicals known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov

VIN Verification Service Item

This product allows for a VIN verification service.

VIN part verificaion is a service that we provide free of charge when a part is purchased.
When you provide your VIN below we will personally verify your part selection by your VIN before shipment of your order.
This helps ensure that this is the correct part for your vehicle.
This is not an automatic VIN check, it is done by a parts specialist once order is placed.
We can only VIN verify vehicles back to model year 1996, if older we can help but can't guarantee fitment.
If you would like to have your part selection verified before purchase please call or email us.

Shipping Insurance Notice

NOTICE: For orders outside of United States

If you are placing an order to ship outside the United States, Shipping Insurance will be required and added automatically at checkout.

Views: 92997
Brand: Workhorse
Product Code: 19420714
Availability: 2

$391.95
$268.80

Christmas & New Year Sale

Get an additional 10% off when added to your cart
Sale ends 01/02/2025 at 11:59:59

Available Options

VIN Number

Have us Manually Verify Part by VIN Before Shipping

Qty

Add to Wish List Compare this Product

0 reviews / Write a review

19420714 - 8.1L Throttle Body Assembly With Throttle Actuator

PLEASE READ!!!

Ask a question

Write a review

VIN Verification Service Item

Shipping Insurance Notice

Christmas & New Year Sale

Available Options

12588924 - Module - Throttle Actuator Control (TAC Module)

12570168 - 8.1L Throttle Body Gasket

W0003519 - Workhorse Throttle Pedal Assembly

13580112 - Connector 8f Gt 150 Series Sealed (Throttle Body Position Sensor)

15326835PT - Eng Harn Conn - Throttle Body Pigtail