I want to order front and rear shocks for our 2005 Newmar Northern Star. This is the straight axle front with air bags, Correct me if I am wrong but would the correct part numbers be 8805-1020 front and
8805-1022 rear? Also, do you have a package price for all four shocks if purchased together? Is shipping free or? And lastly, can you recommend an installer in the Cleburne Texas area (near Dallas).

Thanks in advance

( Charles Ketchum, 03/23/2019 )

The 8805-1020 for the front and 8805-1022 for the rear would be the correct shocks for your coach. I don't have any recommended installers in that area but most any truck or even auto mechanic should have no issues doing the install.

re: KONI 8805-1020 XC Front If only installed on the front & not on the rear does that cause complications, since the front would have "select dampening" and the rear would not? ( Steve Shelton, 01/17/2019 )

We always encourage replacing all shocks at the same time, especially if changing over to the Koni as they are hydraulic versus gas charged which is typically on there. You can always start with the front and do the rears later, we have a number of customers that do this.

This is for a 2007 Dynamax 260 st RV... Built on a 2005 Freightliner M2 106. I need front shocks
the length from top to bottom bolt is 17 3/4 ". Both top and bottom bolt are 3/4 " ( steve mnas, 07/06/2018 )

We do not have a listing for the Freightliner M2 but we may still have an option. We will need to have the shock removed and measured center of eye hole to eye hole both collapsed and expanded. Also, if there are any part #'s on the shock body they may help.

Hello, I'm looking to improve my ride on a 2018 Holiday Rambler Navigator XE diesel pusher on the Freightliner XCM chassis. Not sure what part number I need for the Koni FSD, any help would be much appreciated.

Thanks, Shawn ( Shawn, 06/27/2018 )

That chassis model has an I-Beam front axle so the Koni FSD part # for the front is 8805-1020 and the rear is 8805-1022.

I have a 2012 Thor Tuscany 42RQ on the Freightliner XC Raised Rail chassis. A friend with an Integra Anthem suggested these shocks as a cure to some horrible handling over highway expansion joints.

What specific part number is recommended for my application?

My friend, Andrei Grecu, dealt with Jon and was quite pleased with the service and technical assistance he received. If this can routed to Jon, that would be great. ( Kim Bertram, 02/02/2017 )

Hi Kim,

Thank you for contacting us! It looks like you have an I-Beam front axle so the 8805-1020 for the front and 8805-1022 for the rear would be the correct part #'s for your application. Let me know if you have any further questions.