This is a custom made engine oil cooler hose assembly to replace the original discontinued oil cooler hose assembly, part # 15002888. Unlike the original, the components of this hose assembly are a multi-piece modular design so that individual pieces can be replaced as needed. This hose assembly is shipped partially assembled which aids in the ease of installation. The new connection at the engine oil cooler eliminates the need for the special washer style seals that the original hose assembly used. This hose assembly replaces all the original components of the factory installed hose assembly.
When installing the engine oil cooler block fitting to the oil
cooler.
Tighten the block fitting bolt to 35 Nm (26 lb ft). (DO NOT OVER-TIGHTEN as it will distort the oil cooler connection block and cause it to leak!!)
