i have a work horse 22 winabago 2007 we had bilstein 24-268097 and 24-186629 shocks on it in the past will the koni 99 series shocks fit the front ? ( brandon, 06/28/2024 )

Hello, the W22 chassis calls for the Koni FSD's , 8805-1001's and the 07 takes 8805-1002's in the rear . We do not list an EVO for that chassis.

Hi,

Will this shock 99B3209 work on the front of my Freightliner S2RV chassis? It’s a renegade super C. ( John Young, 05/25/2023 )

Dimensionally, the compressed and extended lengths are very similar. The OEM shock is 14.33" compressed and 22.80" extended. The 99B-3209 is 14.92" compressed and 23.59" extended. The unknown is where the width of the mounts for the shock are the same or different. The OEM shock appears to have "ears" that stick out from the bushing on either side which leads me to think they might be a little wider than the 99B-3209. This could be overcome with some spacers or even washers but I can't confirm exact fit for this application.

I would like to order 2 Koni 99B-3209 Front shocks for my 2007 Monaco Holiday Rambler Neptune XL with a Roadmaster RR4R chassis. Are these a good fit and what would I order for the rear?
The coach has 46,580 miles on it and I have noticed the front porpoising from time to time, I'd also like to improve the ride. ( Tom Wise, 08/08/2021 )

Hi Tom,

Based on your VIN provided the 99b-3209 are the correct shock for the front of your coach. The rear calls for 8805-1022. From the complaints you are trying to correct I would say, yes these are a great place to start!

I would like to order 2 Koni 99B-3209 Front shocks for my 2004 Western Alpine motorhome. Can you let me know when they are back in stock? Thanks, Kent D. Zehring. 717-554-5580 ( Kent D Zehring, 02/27/2021 )

We should have 99B-3209 in stock around the first week of April, 2021.

I have a 2008 UFO chassis, can you get FSD shocks front and rear? ( Kip Barker, 07/09/2020 )

You would use the Koni EVO 99B-3209 for the front and the Koni FSD 8805-1002 for the rear.