i have a Winnebago Adventurer 38t workhorse w series I need new shocks all around Koni fsd if possible.
Thanks, Rick Jones ( RICK JONES, 09/06/2023 )
We would want to verify with VIN but the part #'s you should need for a 2008 W-series is 8805-1001 for the front and 8805-1002 for the rear.
just bought the Koni 8805-1001 shocks from you for our W24, what is the torque for the 1 1/8" bolts? also will be doing rear shortly 8805-1002 need the torque there as well.
thanks ( Bill McElroy, 05/11/2021 )
The upper and lower shock mount bolts are torque to 150 lb-ft. The rear shock nuts are torque to 30 lb-ft.
Spec say I have 2009 Workhorse W16 chassis.
Tried 8805-1001, but Front and rear Shocks have eyelets on both ends.
Do you know which model is correct? ( Phillip Cain, 01/22/2021 )

Unfortunately, Koni does not make a shock for the 2009 or later W16 chassis.

Is the $160 price for one shock? ( Larry Powers, 06/03/2017 )

Hi Larry,

These Koni shocks are $160 each.

Just received these shocks last week and noticed there was no mounting hardware in boxes. ( Front ) Do you use existing rubber from the old shocks when mounting the new ones? Thanks. Garry. PS The front shock boxes had been open but the rear shock boxes were sealed.

 ( Garry Shaw, 03/28/2016 )

Garry,

The 8805-1001 does not require any additional hardware or bushings, they are pressed in. The only thing you will reuse is the nuts, bolts and washers.