TT2300 - TigerTrak Rear Trac Bar Chevrolet/Workhorse P32

On SALE!

Click Image for Gallery

PLEASE READ!!!

Order Shipment Notice:

Most orders are shipped within 24 hours from the order date. Orders placed on the weekend or after cutoff on Friday, and orders placed on select holidays are processed on the next business day. Please see our shipping terms for more information.

Made in America

Verified to have been manufactured in the USA

Part # 10-300 - TigerTrak Rear Trac Bar Chevrolet/Workhorse P32 (3/4" rear spring u-bolts, thru 2005)

Description:

Stops tail wag, improves ride and handling. If you drive a front engine gas motorhome, you’ve experienced the rear end wagging as the body shifts from side to side. TigerTrak greatly reduces this tail wag.

Superior stabilizing track bars. The springs of gas motorhomes tend to sway from side to side, such as when passing a large vehicle. This is especially true of late-model coaches with long parabolic springs and an extended rear overhang. Situated between the rear axle and the frame, TigerTrak allows unhindered up-and-down movement of the springs while virtually eliminating tail wag. So you’ll find your coach easier to drive and the ride more enjoyable.

Superior construction, easy installation. TigerTrak is made from premium materials for increased stability and installation is simple, with only basic tools needed. No drilling is required, so your coach and chassis warranties remain intact.

INSTALLATION INSTRUCTIONS

I have a 02 p32 workhorse 8.1l winnebago 27foot narrow front chassis ut has a pullout so the exhaust runs behind the axle, can I install tt2300 with out rerouting the exhaust system? ( Karol Juskiewicz, 08/11/2021 )

You will need to purchase this tail pipe kit to install: https://www.ultrarvproducts.com/SS300TP-Chevy-Workhorse-P30-P32-Tail-Pipe-Relocation-Kit ( Support )

I have conversed before about a trac bar. I see a current sale. Thanks for that. I looked at bolt length extension. Your instruction requires 1.5" and I have rounded axle clamps. My actual bolt extensions are three at 1.375" and one at 1.5" My question then is about having enough thread to install the trac bar to the spring u-bolts?

Can I squeak by with the bolt lengths that I have?

Bill in Omaha ( Bill Frasier, 03/31/2020 )

Bill, The parts that you would be adding on top of the nuts holding the axle plate, would be the bracket 3/8" thick, the washer 1/8" thick, and the Top lock nut 5/8" thick. If you add those together you get 1 1/8" of parts you are adding. So if you have 1 3/8" I think you would be just fine. ( Support )

Ask a question

Your Name

VIN...(This is helpful):

Your Question

Note: HTML is not translated!

WARNING PROP65 - see details above The state of California requires that this warning be posted for people purchasing products that reside in California.

WARNING: Products may contain one or more chemicals known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov